Journal Bearing Billet Wheel Turbo with specs as follows:
Billet Compressor wheel: 63.5mm/84mm
Compressor Housing: 0.7 A/R Anti-Surge, 4″ Inlet, 2.5″ Outlet
Turbine wheel: 68mm/62.3mm
Turbine housing: T3 Inlet, V-Band outlet(ID roughly 3”, OD roughly 3.5”), A/R 0.82
Fit Vehicle: Universal turbo for performance use, racing car etc.
Fit engine displacement 2.0-4.5L and typically good for around 600HP. Fit engine displacement 4.0-8.0L
for twin turbo applications and up to 1200HP.
Recomanded boost presure are 0.5Bar(7psi) to 1.5Bar(21psi), if boost presure higher than 2Bar,
it will significantly reduce the turbo lifespan and may result in damaging of you engine .